Choose your centerpiece. Wire wrap 1. Cut two pieces of 24-gauge wire each at least 5 inches long. Products listed in description. You might have found a beautiful piece of sea glass while walking the beach, or maybe you have a semi-precious stone that you think just breathtaking, but either can make a beautiful piece of wire wrap art. Start by cutting a piece of your 20-gauge wire and a much longer piece of your 26-gauge wire. Stones with holes bored through their centers are easiest to work with, as are flattened stones. How to wire wrap a tumbled stone. Hold both pieces and wrap the 26-gauge wire around the other wire, pulling it tight. How to wire wrap a tumbled stone. Tumbled stones are easier to wrap than rough-cut stones, but both can have a wonderful effect. Instructions Cut the Wire. At their center points, cross the two wires and twist them together (as shown in... Align the Wire on the Stone. Handmade wire jewelry. Products listed in description. for wire or...Copper wire - - Jeweler's Tools - Pliers - Nose pliers - cutters - pliers - pliers - Round stones pose extra challenges. Simple DIY Painted Ceramic Earrings (Wire Wrap Tutorial) Wire is the base for tons of earrings and … Keep wrapping tightly and you will create the coiled look that is common on many wire-wrapped pieces. Quartz, agate, obsidian, tiger’s eye, petrified wood, and many other gemstones look beautiful wire wrapped. Twist the Wires Together for 1 Side.